All Products , Electrical Test Instruments , Earth Ground Tester , TM25R High Frequency Earth Ground Tester
Fwd. Delivery

TM25R High Frequency Earth Ground Tester

  • MAKE : 
  • MODEL : 
  • SKU : 
    On backorder
 (Incl 5% VAT)
  • 1 x TM25R High Frequency Earth Ground Tester
    31500 AED
  • Subtotal 31500 (Incl 5% VAT)

Add to cart
Buy Now

TM25R High Frequency Earth Ground Tester

Testing of the power transmission towers grounding (G) quality poses a serious problem as they are all electrically interconnected by means of Ground Wires which act as lightning rods, protecting the lines from atmospheric discharges. 

  •  Intended for measurement of earth resistance of electricity pylons
  •  Minimizes the influence of adjacent pylons, connected by the guard cable
  •  Operation frequency: 25 kHz
  •  Resistance reading: up to 300 O
  •  Automatic current injection
  •  Built-in memory and printer
  •  Rechargeable battery

Due to the existence of this connection, any attempt to measure a tower grounding (G) resistance using a conventional earth meter leads to wrong results as what is really being measured is all the shunt towers grounding (G) resistance (or, more precisely, its impedance at low frequency). Trying to disconnect the ground wire from an energized line is a risky operation due to the need for climbing to the tower highest part as well as for the proximity to the high-voltage conductors. To make this kind of test feasible, which is of vital importance to ensure the transmission of the electrical power without interruptions, TENTECH TM25R grounding resistance meter for high frequency has been developed. This is the appropriate tool for a fast, safe and reliable grounding resistance measurement in each tower of a working line transmission, without disconnecting the ground wire. Its operation is based on the use of a high-frequency measurement current (25 kHz), for which ground wire inductive impedance - taking into account a typical length span is reasonably high, making it possible to reduce the effect of the adjacent towers under measurement. The equipment only measures the ground resistance of the surveyed tower, including its base. The extensive G systems, such as meshes, buried wires, metal pipes, etc, are measured only considering the closest section to the connection point, so that the measured value represents the performance, against a pulse signal similar to an atmospheric discharge. The test is performed by making the known-value current flow through the earth diffusion resistance and an auxiliary electrode, called the current electrode, and by measuring the voltage produced between grounding and another auxiliary electrode, thrust into the ground in the area of the potential created by flowing current (Potential Plateau). The current injected by the earth meter is automatically adjusted to the predetermined value and the equipment and it directly indicates the resistance value on its ohms-grades scale. The TM25R has a Bluetooth interface that allows remote control of it through a tablet with TENTECH's app. With it you can save the photos of the towers and the GPS coordinates of each. It also allows you to record voice comments for each measurement. This equipment is powered with its universal charger, from a built-in rechargeable battery. It is a strong equipment, easy to carry, resistant to the hard weather and geographical features of the tropical and high-mountain regions, that is why it is described as an excellent product for field works under the most severe environmental conditions.

    Measurement ranges

    0 – 300 Ω.

    Operation frequency

    25,000 Hz.

    Test current

    20 mA automatic.

    Inductive Component compensation

    Through bank of capacitors integrated to the equipment.
    Maximum capacity: 4.2 µF.
    Resolution: 10 nF.

    Measurement accuracy

    ± 2.5 % of reading ± 1 digit.


    Alphanumeric display (LCD).

    Max. earth resistance of auxiliary rods

    2,000 Ω (current rod).
    2,000 Ω (voltage rod).

    Built-in memory

    It allows for the storage of 2,000 tests readings in its internal NVRAM memory.


    USB and Bluetooth.

    BlueLogg software

    Software for remote control via a tablet. Compatible with Android 4.0 Ice Cream Sandwich (API 14) or higher.

    Power supply

    Internal or external rechargeable battery, 12 V. Internal battery autonomy: at least 2 hours

    Battery charger

    For 100 – 240 V~ 50/60 Hz.

    Operation temperature

    23 °F to 122 °F (-5 °C to 50 °C).

    Storage temperature

    5 °F to 158 °F (-15 °C to 70 °C).


    95 % HR (without condensation).

    Equipment weight

    Approx. 10.80 lb (4.9 kg).


    13.39" x 11.62" x 5.98" (340 x 295 x 152 mm).


Be the first to review “ TM25R High Frequency Earth Ground Tester”
Save my name, email, and website in this browser for the next time I comment.
Request for Demo