ENG
CURRENCY :
AED
All Products , Electrical Test Instruments , Multifunction Testers , Safe Isolation Testers , Multifunction Tester of LV Switchgears and Controlgears FULLTEST3
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery
Fwd. Delivery

Multifunction Tester of LV Switchgears and Controlgears FULLTEST3

  • MAKE : 
    Ht-instruments
  • MODEL : 
    FULLTEST3
  • SKU : 
    HV000003
  • AVAILABILITY : 
    On backorder
Request for quotation
ADD TO WISHLIST

Multifunction Tester of LV Switchgears and Controlgears FULLTEST3

Multifunction Tester for safety of machinery IEC/EN60204-1:2016 and low voltage switchgears and controlgears IEC/EN61439-1-2:2011 IEC/EN60204-1:2016 Measurements:

1.Power Frequency Dielectric withstand voltage with test voltage of 1000VAC

2.Testing protection against indirect contact:

  •   Continuity of protective conductors with test current 200mA
  •    Automatic disconnection of the supply (RCD, MCB, Fuse)​
  •    RCD tripping (RCD AC, A, B) up to 1A on TT Systems
  •    Magneto-thermal protections (MCB curve verificaiton on B, C, D, K) and fuses (gG, aM) on TN Systems
  •    Discharging of residual voltage V<60V in 5sec/1sec
  •    Insulation resistance measurement with test voltage of 500VDC

3.Insulation resistance measurement with test voltage of 500VDC

4.Discharging of residual voltage V<60V in 5sec/1sec IEC/EN61439-1-2:2011 Measurements:

5.Clearances and Creepage distances:

  •     Dielectric withstand voltage with test voltage of up to 3400/5100VAC
  •     Continuity of earth system and protective conductors ≥10A
  •     Power Frequency Dielectric withstand voltage with test voltage of 1800VAC
  •     Alternative power-frequency voltage test up to 5100VAC
  •     Test on enclosures of insulating material:
  •     ​Dielectric Withstand voltage with test voltage up to 2835V

6.Discharging of residual voltage V<60V in 5sec/1sec

HT Instruments offers a cutting-edge device to carry out all measurements required by the new laws as regards tests to be performed on electric switchboards and machines IEC/EN60204-1:2016 and IEC/EN61439–2:2011. Further to measurements of protective conductors’ continuity, insulation and dielectric strength, FULLTEST3 is capable of carrying out tests on RCDs type A, AC and B, General, Selective and Delayed, measurements of Line/Loop impedance also with high resolution 0.1mΩ (with optional accessory IMP57), measurement of non-trip earth resistance and leakage current with clamp transducer. It can also carry out test on breaking capacity, protection tripping, I2t tests relevant to magneto-thermal circuit breakers in curve B, C, D, K and fuses type gG and aM. The device is also provided with a “touch-screen” colour display and 3 USB ports for connection to PC, USB pen drive, USB printers and possible bar code readers.

 

    Continuity of protective circuit with 200mA

    Yes

    Insulation with test voltages 100, 250, 500, 1000VDC

    Yes

    Dielectric strength with voltage programmable from 250V to 5100VAC

    Yes

    Discharge time/residual voltage on plugs and internal circuits

    Yes

    Absorbed/leaked current and power at plug of machines

    Yes

    Tripping time/current of type A, AC, B General and Selective RCDs up to 1000mA

    Yes

    Contact voltage

    Yes

    Line/Loop impedance and Ipsc calculation

    Yes

    Line/Loop impedance with high resolution (with optional accessory IMP57)

    Yes

    Non-trip earth resistance

    Yes

    Leakage current (with optional accessory HT96U)

    Yes

    Phase sequence

    Yes

    Timer and limit thresholds selectable through programmable ramps

    Yes

    USB interface

    Collegamento ad accessori opzionali

    Provided PC interface with software for Windows

    Yes

    Guidelines

    CEI 64-8
    CEI 64-8/7
    CE MARK
    EMC 2014/30/EU
    EMC: IEC/EN61326
    EN50106
    IEC/EN60204-1
    IEC/EN60598-1
    IEC/EN61010-1
    IEC/EN61187
    IEC/EN61335-1
    IEC/EN61439-1
    IEC/EN61439-2
    IEC/EN61557-1
    IEC/EN61557-13
    IEC/EN61557-14
    IEC/EN61557-2
    IEC/EN61557-3
    IEC/EN61557-4
    IEC/EN61557-6
    IEC/EN61557-7
    LVD 2014/35/EU
    UNE20460

Reviews

Be the first to review “ Multifunction Tester of LV Switchgears and Controlgears FULLTEST3”
Save my name, email, and website in this browser for the next time I comment.
Request for Demo