Fwd. Delivery

15 kV MD-15kVR Digital Insulation Tester

  • MAKE : 
  • MODEL : 
  • SKU : 
    On backorder
 (Incl 5% VAT)
  • 1 x 15 kV MD-15kVR Digital Insulation Tester
    19500 AED
  • Subtotal 19500 (Incl 5% VAT)

Add to cart
Buy Now
Request for quotation

15 kV MD-15kVR Digital Insulation Tester

The digital insulation tester model MD-15KVR is Megabras' cutting edge insulation analyzer equipment and it is one of the most complete and sophisticated available in the international market. A powerful software allows for further analysis of tests results, including features such as graphical representation and automatic report generation. Its proven technology provides safe, reliable and accurate measurements of insulation resistances up to 15 TΩ, with 4 pre-selected test voltages, 500 V - 5 kV - 10 kV - 15 kV. Other test voltages may be selected in steps of 25 V or 500 V.

A state-of-the-art microprocessor controls the equipment operation and enables the incorporation of advanced features which make measurements easier: auto-range selection, built-in memory for up to 16,000 measured values, AC/DC voltmeter, automatic measurement of Absorption Index and Polarization Index, leakage current and capacitance measurement, timer enabling programming of test duration, configurable Pass-Fail test, Step voltage test, real time clock and calendar. Built-in chronometer, indicating elapsed time, in minutes and seconds, since the test started.

Measured values are transmitted through the USB interface and are printed in the built-in printer as a registration of the performed test. Furthermore, the measured values are stored in a non-volatile internal memory. Up to 16,000 measured values may be stored, to be transferred afterward to a computer running the MegaLogg2 program. This software allows a further analysis of the test results, including a graphical representation and automatic report generation. The real time clock and calendar, and the sequential test number, facilitates the identification of each test, and the organization of a predictive maintenance system by trend analysis. The MD-15KVR has a Bluetooth interface that allows remote control of it through a Android device with BlueLogg software. With it you can take the photos of the objects under test and the GPS coordinates of each. It also allows you to record voice comments for each measurement.

The MD-15KVR is powered using a rechargeable battery. The cabinet is strong and lightweight, easy to carry, impact-resistant and suitable to be used under severe weather conditions. Thus the megohmmeter supplies very reliable and accurate measurements both in laboratory and out in the field.

    Model MD-15KVR
    Test voltage 500 V, 5,000 V, 10,000 V, 15,000 V directly, one button selectable. 500 V to 10 kV in 25 V or 500 V steps. DC, negative
    Maximum resistance reading 15 TΩ @ 10 kV up to 15 kV.
    10 TΩ @ 5 kV up to 9.99 kV.
    5 TΩ @ 1 kV up to 4,99 kV.
    1 TΩ @ 525 V up to 999 V.
    500 GΩ @ 500 V.
    DC voltmeter 15 V up to 1,000 Vdc.
    Accuracy: ±(5% of reading + 3 digits).
    AC voltmeter 15 V up to 1,000 Vrms.
    Accuracy: ±(5% of reading + 3 digits).
    Leakage current measurement 1 nA up to 1,500 µA
    ±(10% of reading + 3 digits).
    Capacitance measurement 50 nF up to 10 µF @ 500 V.
    50 nF up to 5 µF @ 1,000 V.
    30 nF up to 2 µF @ 2,500 V.
    30 nF up to 1 µF @ 5,000 V.
    30 nF up to 680 nF @ 10,000 V.
    30 nF up to 680 nF @ 15,000 V.
    Accuracy: ±10% of reading ± 3 digits.
    Advanced Features • Dielectric discharge.
    • Ramp test.
    • Automated Polarization Index calculation.
    • Automated Dielectric Absorption Ratio calculation.
    • Programmable Pass-Fail test.
    • Step Voltage Test.
    • Built-in memory for up to 16,000 measured values.
    • Switchable filter to remove external noise interference.
    MegaLogg2 Software Friendly, easy to use software. Tests are represented in graphic and tabular views. With automatic report generator, including the operator's commentaries.
    Built-in printer Prints elapsed time, actual voltage and resistance measured each 15 seconds.
    Dimensions 450 x 360 x 190 mm
    Weight Approx. 6.3 kg.

    2 Measuring test leads.
    1 GUARD test lead.1 AC adapter.
    1 USB Cable.
    1 Protective bag.
    1 User guide.
    1 T-Logger software.


Be the first to review “ 15 kV MD-15kVR Digital Insulation Tester”
Save my name, email, and website in this browser for the next time I comment.
Request for Demo