All Products , Pressure Measurement , Pressure Calibrators , Hydraulic Pressure Test Pump LPP 700
In stock

Hydraulic Pressure Test Pump LPP 700

  • MAKE : 
    LR Cal
  • MODEL : 
    LPP 700
  • SKU : 
    In stock
 (Incl 5% VAT)
  • 1 x Hydraulic Pressure Test Pump LPP 700
    6000 AED
  • Subtotal 6000 (Incl 5% VAT)

Add to cart
Buy Now

Hydraulic Pressure Test Pump LPP 700

The pressure test pump LR-Cal LPP 700 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 700 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

Despite its compact dimensions, the pressure test pump LR-Cal LPP 700 is easy to operate and allows for exact generation of the required test pressures The LR-Cal LPP 700 is fitted with a fine adjustment valve for a precise adjustment of pressures.

The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

    Pressure generation 0 to 700 bar = 0 to 10,152 psi
    Pressure ports
    (standard version)
    For reference instrument (on the top of the pump):
    1/2" BSP female (freely rotating), with integr. O-ring
    For test item (at the test hose):
    1/4" BSP female (freely rotating), with integr. O-ring
    This connection is made via an adapter, at the pump is a MINIMESS 1620 port.
    Materials Aluminium, brass, ABS, Plexiglas, NBR
    Priming pressure Hand lever
    High pressure Switch-over knob, reduced lever stroke
    Pressure fine adjustment Fine volume adjuster (with large volume)
    Operating media Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
    Fluid reservoir Volume > 200 cm³, can be filled during stroking
    Dimensions approx. 270 x 160 x 120 mm (without test hose)
    Weight approx. 1.3 kg (without test hose)
    Order-Code LPP-700


Be the first to review “ Hydraulic Pressure Test Pump LPP 700”
Save my name, email, and website in this browser for the next time I comment.
Request for Demo