ENG
CURRENCY :
AED
In stock

5kV Digital Insulation Tester MD5060x

  • MAKE : 
    Tentech
  • MODEL : 
    MD5060X
  • SKU : 
    IRTTMD56
  • AVAILABILITY : 
    In stock
PRICE: 
9375
 AED
 (Incl 5% VAT)
  • 1 x 5kV Digital Insulation Tester MD5060x
    9375 AED
  • Subtotal 9375 (Incl 5% VAT)

Add to cart
ADD TO WISHLIST

5kV Digital Insulation Tester MD5060x

The TENTECH MD5060x is a smart, microprocessor-controlled, 5 kV insulation tester. Besides the conventional measurement of insulation resistances up to 5 TΩ, its features allow to automatically measure both the polarization index and dielectric absorption index, thus significantly simplifying testing of transformers.

Features:

- Insulation resistances up to 5 T&Omega
- Auto-range
- Guard terminal
- Digital & bargraph reading
- Alphanumerical display
- Programmable timer
- Automated tests: absorption index and polarization index
- Step voltage test
- Programmable pass-fail
- Real time clock and calendar
- Built-in printer
- 4000  readings memory
- USB interface
- Rechargeable LFP battery
- Auto power-off
- Software for data management

This insulation tester is a portable, battery-powered equipment. Test voltage may be chosen from 500 V up to 5 kV in 100 V increments. Due to its measurement principle (actual voltage and current readings) the accuracy of resistance measurement is not affected by any test voltage error. Nevertheless, the high-voltage generator is electronically stabilized with a better than 2 % accuracy in open-circuit condition and for any normal operation battery voltage.Measured values are transmitted through the USB interface and are printed in the built-in printer as a registration of the performed test. Furthermore, the measured values are stored in a non-volatile internal memory. Up to 4000 measured values may be stored to be transferred afterward to a computer running the T-Logger program. This software allows a further analysis of the test results, including a graphical representation and automatic report generation.

The MD5060x is powered by a rechargeable LFP battery and has an automatic charger that may be connected to 100 – 240 V mains supply (AC Adapter). The cabinet is strong and lightweight, easy to carry, impact-resistant and suitable to be used under severe weather conditions. Thus the megohmmeter supplies very reliable and accurate measurements both in laboratory and out in the field.

    Test voltage 500, 1000, 2500, 5000 V directly, one button selectable.
    500 V to 5 kV in 100 V increments. DC, negative.
    Maximum resistance reading 5 TΩ @ 5 kV.
    Short circuit 1.5 ± 0.5 mA.
    Test voltages accuracy ± 3 % of nominal test voltages on R ≥ 10 GΩ.
    Insulation tester basic accuracy ± 5 % of reading from 1 MΩ up to 1 TΩ.
    ± 20 % of reading from 1 TΩ up to 5 TΩ.
    Advanced features Automated polarization index calculation.
    Automated dielectric absorption ratio calculation.
    Step voltage test.
    Programmable pass / fail test.
    Built-in printer Prints elapsed time, actual voltage and resistance measured each 15 seconds.
    Built-in memory Stores up to 4000 measured values.
    Interface USB.
    Built-in chronometer Shows elapsed time in mm:ss format. Count starts automatically for each measurement.
    Real time clock and calendar Allows a reliable identification for each test.
    T-Logger software Friendly, easy to use software. Tests are represented in graphical and tabular views. With automatic report generator, including the operator's commentaries.
    Environmental protection IP54 (with closed lid).
    Safety class In accordance with IEC 61010-1.
    E.M.C. In accordance with IEC 61326-1.
    Electrostatic immunity In accordance with IEC 61000-4-2.
    Electromagnetic irradiation immunity In accordance with IEC 61000-4-3.
    Power supply Internal rechargeable LFP 12 V – 3000 mAh battery.
    Battery charger 12 V – 2 A.
    Operating temperature range 23 °F to 122 °F (-5 °C to 50 °C).
    Storage temperature range -13 °F to 158 °F (-25 °C to 70 °C).
    Humidity range 95 % RH (non condensing).
    Equipment weight Approx. 7.94 lb (3.6 kg).
    Dimensions 10.78" x 9.84" x 4.88" (274 x 250 x 124 mm).

    2 Measuring test leads.
    1 GUARD test lead.
    1 AC Adapter.
    1 T-Logger software (CD-ROM).
    1 User guide.
    1 Protective bag.
    1 USB cable.

Reviews

Be the first to review “ 5kV Digital Insulation Tester MD5060x”
Save my name, email, and website in this browser for the next time I comment.