ENG
CURRENCY :
AED
Fwd. Delivery
Fwd. Delivery

5kV Digital Insulation Tester MD5075x

  • MAKE : 
    Tentech
  • MODEL : 
    MD5075X
  • SKU : 
    IRTTTMD5075x
  • AVAILABILITY : 
    On backorder
PRICE: 
9200
 AED
 (Incl 5% VAT)
  • 1 x 5kV Digital Insulation Tester MD5075x
    9200 AED
  • Subtotal 9200 (Incl 5% VAT)

Add to cart
ADD TO WISHLIST

5kV Digital Insulation Tester MD5075x

The digital insulation tester modelMD5075xis TENTECH's cutting edge insulation analyzer equipment. It is one of the most complete and sophisticated available in the international market. A software allows for further analysis of tests results, including features such as graphical representation and automatic report generation. Its proven technology provides safe, reliable and accurate measurements of insulation resistances up to 5 T?, with 4 pre-selected test voltages: 500 V - 1 kV - 2.5 kV - 5 kV. Other test voltages may be selected in steps of 25 V, 100 V or 500 V.

Features : 

- Insulation resistances up to 5 TO

- Automated tests: absorption index, polarization index, capacitance

-  leakage current and AC/DC voltmeter

- Step Voltage Test

- Real time clock and calendar

- Built-in printer

- 4000 readings memory

- Software for data management

Microprocessor controls the equipment operation and enables the incorporation of advanced features which make measurements easier. It has built-in printer, real time clock and calendar. Measured values are transmitted through the USB interface. Results can be printed in the built-in printer as a registration of the performed test. The measured values are stored in a non-volatile internal memory. Up to 4000 measurements may be stored, to be transferred afterward to a computer running the T-Logger program. This software allows a further analysis of the test results, including a graphical representation and automatic report generation. The MD5075x Digital Insulation Tester is powered by a rechargeable LFP battery. The cabinet is strong and lightweight, easy to carry, impact-resistant. It is suitable to be used under severe weather conditions. Thus the insulation tester supplies very reliable and accurate measurements both in laboratory and out in the field. 

    Test voltage 500 V, 1,000 V, 2,500 V, 5,000 V directly, one button selectable.
    250 V to 5 kV in 25 V, 100 V or 500 V steps. DC, negative.
    Maximum resistance reading 5 TΩ @ 1 kV up to 5 kV.
    1 TΩ @ 500 V up to 1 kV.
    500 GΩ @ 250 V up to 500 V.
    DC Voltmeter 10 V up to 1000 Vdc.
    Accuracy: ±(5 % of reading + 3 digits).
    AC voltmeter 10 V up to 1000 Vrms.
    Accuracy: ±(5 % of reading + 3 digits).
    Overvoltage category CAT III – 600 V.
    Leakage current measurement 1 nA up to 3 mA
    Accuracy: ±(10 % of reading + 3 digits).
    Capacitance measurement 50 nF up to 10 µF @ 500 V.
    50 nF up to 5 µF @ 1,000 V.
    30 nF up to 2 µF @ 2,500 V.
    30 nF up to 1 µF @ 5,000 V.
    Accuracy: ± 10 % of reading ± 3 digits
    Short circuit current Max. 3 mA.
    Test voltage accuracy ± 3 % of nominal test voltages on 10 GΩ.
    Insulation tester basic accuracy ± 5 % of reading from 1 MΩ up to 1 TΩ @ 5 kV.
    ± 20 % of reading from 1 TΩ up to 5 TΩ @ 5 kV.
    (for lower test voltages, the upper limit will be reduced proportionally).
    ± 20 % of reading from 10 kΩ up to 100 kΩ.
    ± 10 % of reading from 100 kΩ up to 1 MΩ.
    Advanced features • Automated polarization index calculation.
    • Automated dielectric absorption ratio calculation.
    • Programmable pass-fail test.
    • Step voltage test.
    • 4,000 readings memory.
    • Switchable filter to remove external noise interference.
    Built-in printer Prints elapsed time, actual voltage and resistance measured each 15 seconds.
    Interface USB.
    Built-in chronometer Shows elapsed time in mm:ss format. Count starts automatically for each measurement.
    T-Logger Software Friendly, easy to use software. Tests are represented in graphic and tabular views. With automatic report generator, including the operator's commentaries.
    Environmental protection IP65 (with closed lid).
    Safety Class In accordance with IEC 61010-1.
    E.M.C. In accordance with IEC 61326-1.
    Electromagnetic irradiation immunity In accordance with IEC 61000-4-3.
    Electrostatic immunity In accordance with IEC 61000-4-2.
    Power supply Internal rechargeable (LiFePO4 12 V – 6000 mAh).
    Battery charger 12 V – 2 A.
    Operating temperature rang e
    23 °F to 122 °F (-5 °C to 50 °C).
    Storage temperature range -13 °F to 158 °F (-25 °C to 70 °C).
    Humidity range 95 % UR (non condensing).
    Equipment weight Approx. 9.48 lb (4.3 kg).
    Dimensions 13.39" x 11.62" x 5.98" (340 x 295 x 152 mm).

    2 Measuring test leads.
    1 GUARD test lead.
    1 AC Adapter.
    1 T-Logger software (CD-ROM).
    1 User guide.
    1 Protective bag.
    1 USB cable

Reviews

Be the first to review “ 5kV Digital Insulation Tester MD5075x”
Save my name, email, and website in this browser for the next time I comment.